Basic Recording And Playback; Connections Of External Equipment - Fostex VF08 Owner's Manual

Basic Recording/Playback

Basic Recording and Playback

This chapter describes the basics of recording and playback audio using the VF08.

Connections of external equipment

You can connect various sound sources and external devices to the input and output connectors of the VF08 as
shown in the example below. When making connection, make sure that the [MASTER] fader is set to the lowest
(" ") position and the [PHONES] knob to the leftmost ("MIN") position. Otherwise, your speakers or headphones
may damage by the audio noise generated when connecting cables.
Microphones (Dynamic
or condenser type)
<Note>
You cannot use both the [BAL] and
[UNBAL] connectors on INPUT A and
INPUT B simultaneously. Plugging the
[UNBAL] connector disconnects the
[BAL] connector.
Electric guitar
Digital equipment (CD, MD, DAT etc.)
Headphones
INPUT A
BAL
GUITAR
LINE MIC
UNBAL TRIM
CH ON/OFF
PEAK
AC outlet
PHONES ST OUT FOOT SW
INPUT B
L R
BAL
MIX PARAMETER
TRACK
EDIT SCENE SCENE SEQ.
GUITAR
PGM FADER
MAP
PAN EQ EFFECT
LINE MIC MIN MAX
UNBAL
TRIM
ON/OFF
BOUNCE MODE 2TRK MODE
CH ON/OFF MASTERING TRAINING
PEAK
Guitar processor
Electric bass
POWER PHANTOM S/P DIF / DATA MIDI
INPUT
ON OFF OUTPUT INPUT OUTPUT
22
Amplifier + Speakers etc.
Foot switch (mode 8051)
DIGITAL MULTITRACKER
ACCESS
PHANTOM
F1 F2 F3
Top panel
Rear panel
Sequencer
PC w/sequence software