Component Video; Video Out (European Model Only); S-Video Out - Teac Esoteric DV-50 Owner's Manual

Component Video

This setting is necessary only when your TV or monitor is
connected via the COMPONENT VIDEO OUT terminals.
Audio1 A2 Video1
TV Screen
Component Video
Video Out

S-Video Out

Frame Search
Screen Saver
Move
Progressive:
Select this when your TV is compatible with progressive scan.
Compared to a standard interlaced TV picture, a progressive
scan TV is capable of stable, flicker-free images.
Interlace (default):
Select this when your TV is not compatible with progressive
scan.
< When your TV isn't compatible with progressive scan, never
select "Progressive". No picture will be shown on the monitor.
In case you select "Progressive" by mistake, connect your TV
via the VIDEO OUT jack or S-VIDEO jack to display the Setup
menu and change the setting to "Interlace", or initialize the
settings (see page 35).
< If this player is set to output progressive-scan video, it's
possible that the picture will appear stretched when playing
discs recorded in 4:3 format. This happens when the TV's
aspect ratio is set "Full". To see the picture in its correct aspect
ratio, change the TV setting to "Normal".
If your TV doesn't have settings to change the aspect ratio
of the picture, set this player to 16:9(Compressed).
< Not all progressive-scan TVs are fully compatible with this unit.
In case of trouble, please select "Interlace".
V2 Language General
16:9 (Wide)
Progressive
Interlace
S2
Off
Off
Exit
SETUP

Video Out (European model only)

This setting is necessary only when your TV or monitor is
connected via the AV CONNECTOR 1(RGB).
Select the proper signal to be output from the AV CONNECTOR
1(RGB).
Audio1 A2 Video1
TV Screen
Component Video
Video Out
S-Video Out
Frame Search
Screen Saver
Move
Video (default):
Outputs composite video signal. Compatible with all TVs, but
lowest quality of the three.
S-Video:
Outputs S-Video signal. Select this when your TV or monitor is
compatible with S-Video.
RGB:
Outputs RGB video signal. Select this when your TV or monitor
is compatible with RGB. This setting gives the best picture
quality of the three.
< When your TV isn't compatible with RGB or S-Video, never
select them. No picture will be shown on the monitor.
In case you select RGB or S-Video by mistake, connect your
TV via the AV CONNECTOR 2 (or VIDEO OUT jack or S-VIDEO
jack) to display the Setup menu and change the setting to
"Video", or initialize the settings (see page 35).
S-Video Out
EXPERT
This setting is necessary only when your TV or monitor is
connected via the S-VIDEO OUT terminals (or when S-Video
signal is output from the AV CONNECTOR).
Audio1 A2 Video1
TV Screen
Component Video
Video Out
S-Video Out
Frame Search
Screen Saver
Move
S1:
Outputs the S1-Video signal containing information on the
aspect ratio(4:3 and 16:9).
S2 (default):
In addition to the information of S1, S2-Video signal contains
information on the aspect ratio (4:3 Letter Box). When your
wide-screen TV is compatible with S2-Video, correct aspect
ratio will be selected automatically.
< If the picture is stretched or distorted, select "S1".
V2 Language General
16:9 (Wide)
Interlace
Video
S-Video
RGB
Off
Exit
SETUP
V2 Language General
16:9 (Wide)
Interlace
Video
S1
S2
Off
Exit
SETUP
41