Stand Alone And Usb Modes - Tascam CD-D11U User Manual

10.11 Stand Alone and USB Modes

This function enables or disables the USB port on the CD Duplicator. The default
mode is
Stand Alone
Note: The minimum system requirements for your computer to work with this
duplicator in USB Mode:
PC
❑ IBM-Compatible PC Pentium 800MHz or higher
❑ 128MB RAM
❑ Windows 2000 or XP
❑ One available USB 2.0 port.
Macintosh
❑ G4 System or higher
❑ Mac OS 10.0
To switch to USB mode, follow these steps:
1. Turn the unit on.
The LCD panel will read
2. Enter the Advance Setup (
for two seconds.
3. In the
Adv Setup
until the LCD panel displays
button.
The LCD displays
4. Connect the "B" side plug of an optional USB cable to the back of the
CD Duplicator.
5. Connect the other end of the USB cable to a USB 2.0 port on your com-
puter.
Only the target (bottom) drive of the CD Duplicator will be recognized by the
computer as an external USB device.
On a Windows computer, the CD Duplicator drive will be assigned the next
available drive letter in "My Computer" and in Windows Explorer.
On a Macintosh computer, an icon titled "
computer desktop.
Note: If you have recording software installed on your computer, you will
be able to record files from the computer to the CD Duplicator's target
drive.
TASCAM CD-D11U User's Manual
.
.
1. Copy
Adv Setup
menu, press the down arrow
Switch USB Mode
USB L.H. Mode
10.11 Stand Alone and USB Modes
) menu by pressing the ESC button
, then press the ENTER
.
XXXXXXXX
button repeatedly
" will appear on the
15