Table of Contents
Advertisement
12.7 Update Firmware
The
Update Firmware
compact disc (CD). The CD must contain the required data file and be inserted in
the source drive. The CD Duplicator will locate the data and update its firmware
automatically. During the update, do not turn off the power to the unit. The update
process is complete after the system resets automatically and displays the main
menu.
12.8 Compare Firmware
The
Compare Firmware
interface board to the update version in the disc.
12.9 H/W Diagnostic
The
H/W Diagnostic
confirms functionality, and displays information about the hardware on the LCD.
12.10 Load Default
The
Load Default
recommended that you reset to the default values if the CD Duplicator fails to
function properly after you make changes to the original configuration.
12.11 CD+G
The
function enables or disables CD+G (karaoke CD) format support. The
CD+G
default setting is
OFF
Note: The CD+G value must be set to OFF before you can use the Track
Extraction features.
12.12 ISRC & MCN
The
ISRC & MCN
The default setting is
12.13 CD-Text
The
function enables or disables the copying of CD-Text discs. The
CD-Text
default setting is
OFF
12.14 Switch USB Mode
The
Switch USB Mode
CD-D17HD Tower CD Duplicators.
TASCAM Tower CD Duplicator User's Manual
function updates the firmware of the interface board via
function compares the current firmware version in the
function detects the devices connected to the interface board,
function resets all settings to factory default values. It is
.
function enables or disables ISRC and MCN format support.
.
ON
.
function is not applicable to either the CD-D13 or
12.7 Update Firmware
21
Advertisement
Table of Contents
