9.12 Button Sound
9.12 Button Sound
This setting turns the button sound On or Off. The default setting is
.
ON
9.13 Device Info
This function displays information for both the source and target drive.
9.14 System Info
This function displays information for the interface board.
9.15 Quick Erase
This function performs a Quick erase on CD-RW discs.
9.16 Full Erase
This function performs a Full erase on CD-RW discs. This function takes longer
than the Quick erase.
10 Advanced Setup (Adv Setup)
Some Advanced Setup functions enable you to change the system configuration.
You should make changes only after you become completely familiar with the
functions in this menu. To enter the Advanced Setup, press the ESC button for two
(2) seconds.
10.1 UnderRun Protect
This setting turns Buffer UnderRun Protection
or
. The default setting is
ON
OFF
.
ON
10.2 Overburn
This setting turns the Overburn function in the target drive
or
. The
ON
OFF
default setting is
.
OFF
10.3 Read Error Skip
This setting controls error skipping during reading of the source disc. When an
error is detected, the target drive stops and displays the read error message. If the
setting is
, no messages will be displayed if an error occurs. The copy process
ON
will be completed and will include all errors found in the process. The default
setting is
.
OFF
TASCAM CD-D11U User's Manual
13