Appendix B. Lcd Messages; Normal Conditions - Tascam CD-D11U User Manual

1x1 cd duplicator with usb output
Table of Contents

Advertisement

Appendix B. LCD Messages

Normal Conditions

Message
Initialize SDRAM
Detect Drives
User Abort!
Analyzing
Source Drive Not Ready
Target Drive Not Ready
Source Disc Not Ready
Target Disc Not Ready
Erasing disc
Fail to get Drive Info!
Fail to get Src Disc Info!
Save new config Fail!
Load Default Config?
Src&Tgt can't in the same
channel
Preparing
Check Target Please Wait
Audio Disc!!! Can't compare!
Identical
Read disc error
Cannot read TOC
TOC not match
Source Disc Empty!!!
Target overflow
Target Disc Not Empty!!!
Press a Key to Eject Good Disc Press any key to eject a good disc after copying
Press a Key to Eject Fail Disc
CD-RW does not Support the
Func
Hold ESC to exit
All data will be lost, erase?
Erase Finished
No Eraseable Disc in CD-RW!! The disc on the CD-RW device is not rewritable.
18
Initialize the memory of the system.
Detect drives are connected to the system.
Cancel a job during operation.
Analyze the source disc.
Source drive is not ready to read.
Target drive is not ready to write.
Source disc is not ready to be read.
Target disc is not ready to be written to.
The system is erasing the data on the disc.
The drive information cannot be obtained.
The information of the source disc cannot be obtained.
The new configuration setting cannot be saved.
Do you want to load the default settings?
During comparison, the source and target discs cannot
be in the same channel.
The system is preparing to record.
The system is checking the target device.
The system cannot compare audio discs.
The comparison results are the same.
During comparison, the disc cannot be read.
The system cannot read the contents of the disc.
The comparison results are not the same.
The source disc does not contain any data.
The target disc does not have enough capacity to store
the new data.
The target disc still contains data.
Press any key to eject a failed disc after copying.
CD-RW doesn't support this function.
Press ESC for one second to terminate the test.
All data on the disc will be lost. Confirm erasure of data.
The erasing of data is complete.
Meaning
TASCAM CD-D11U User's Manual

Advertisement

Table of Contents
loading

Table of Contents