Basic Operation - Tascam CD-D11U User Manual

Basic Operation

Basic Operation
Stand Alone Mode
This section explains the basic operation of the CD Duplicator.
1. Place your source disc in the disc tray of the top drive (source drive).
2. Switch to function [1 Copy] by pressing the
3. Place a blank CD-R disc into the bottom drive (target drive), and press
the ENT button to start copying.
4. When the copy operation is complete, the CD-R disc in the target drive
will be ejected automatically.
Note: With the default setting, after a source disc has been successfully copied,
the CD Duplicator automatically ejects the target CD-R disc.
With the default setting, if the copy operation fails, the failed target CD-R disc
remains in the target drive. To remove the failed CD-R disc, press the eject
button on the bottom drive (target drive) and retrieve the disc. Press the eject
button again to retract the disc tray. You can change the default settings by using
the Advanced Setup menu.
USB Mode
For USB Mode, reference Chapter 3, Function 10.11 "Stand Alone and USB
Modes" on page 15.
8
button.
TASCAM CD-D11U User's Manual