Tascam CD-D4000 MKII Owner's Manual
  1. Manuals
  2. Brands
  3. Tascam Manuals
  4. Disc Duplicator
  5. CD-D4000 MKII
  6. Owner's manual

Tascam CD-D4000 MKII Owner's Manual

Tascam owner's manual cd duplicator cd-d4000 mkii
Hide thumbs Also See for CD-D4000 MKII:
Table of Contents

Advertisement

Quick Links

Download this manual
»
CD-D4000@#
CD Duplicator
˛
Professional
Ü
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
ÿ
the user to the presence of uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons..
The exclamation point within an equilateral triangle is intended to alert the user to the pres-
Ÿ
ence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
This appliance has a serial number
located on the rear panel. Please record
the model number and serial number
and retain them for your records.
Model number
Serial number
OWNER'S MANUAL
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
9101431701

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CD-D4000 MKII and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tascam CD-D4000 MKII

Summary of Contents for Tascam CD-D4000 MKII

  • Page 1 » CD-D4000@# CD Duplicator ˛ Professional Ü The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert ÿ the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.. The exclamation point within an equilateral triangle is intended to alert the user to the pres- Ÿ...

  • Page 2: Important Safety Precautions

    When replacing the fuse only a correctly rated approved type should be used and be sure to re-fit the fuse cover. IF IN DOUBT — CONSULT A COMPETENT ELECTRICIAN. TASCAM CD-D4000 MKII For U.S.A TO THE USER This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

  • Page 3: Important Safety Instructions

    24) Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. TASCAM CD-D4000 MKII ANTENNA LEAD IN WIRE...
  • Page 4 9.2 Physical specifications...12 9.3 Dimensional drawing ...12 1.1 Installing the CD-D4000 MKII The CD-D4000 MKII is designed to fit into 2U of standard 19” rack space. We suggest that you leave 1U of space above the unit to allow for cooling.

  • Page 5: Power Switch

    6 SLAVE drive The SLAVE drive holds the destination CD. This must be a CD-R disc. The CD-D4000 MKII cannot record on CD-RW discs (but can use them in the MASTER drive as source discs).
  • Page 6 It is important that you do not use CD lens cleaners (including CD-R or CD-ROM lens cleaners) with the CD-D4000 MKII. The reason for this is that the drives in this unit rotate at a much higher speed than those of an audio CD unit, and accordingly, the pickup lenses of the drives may be damaged by an ordinary CD lens cleaner.

  • Page 7: Basic Operations

    NOTE Do not turn off the CD-D4000 MKII while writing to the slave disc (i.e. part of the way through a disc copy operation. If you do, the disc will be corrupt, and unusable.

  • Page 8: Setting The Writing Speed

    Do not use warped discs or discs with off-center holes with the CD-D4000 MKII. While the copy operation is in progress, make sure that the CD-D4000 MKII is not subjected to vibra- tion or mechanical shocks. 5.2 Disc copy Press the MODE key until the display appears...
  • Page 9 While the master disc is being checked, the words Checking Data will appear on the screen. If the CD-D4000 MKII does not detect any potential problems with the discs, copying will start. The first part of the disc to be copied is the TOC (Table of Contents).

  • Page 10: Compare Cd-Rom

    C o m p a r e f i n i s h e d F a i l TASCAM CD-D4000 MKII 7.1 Play audio track Since it is impossible to make a bit-by-bit compari- son of audio CDs, this function is provided for you to “audition”...

  • Page 11: Error Messages

    This is because when the CD-D4000 MKII copies data from the MASTER to the SLAVE drive, the data is placed in a RAM (Random-Access Memory) buffer between the two drives.

  • Page 12: Operational Specifications

    TEAC NEDERLAND BV Phone: 030-6030229 TEAC AUSTRALIA PTY.,LTD. A.C.N. 005 408 462 Phone: (03) 9644-2442 TEAC ITALIANA S.p.A. Phone: 02-66010500 TASCAM CD-D4000 MKII a. Subject to appropriate copyright permission being obtained 9.2 Physical specifications Dimensions (w x h x d) Weight...

Table of Contents