Table of Contents
Advertisement
IMPORTANT SAFETY PRECAUTIONS
Listening to CDs
Loop playback
With this function you can continuously repeat the playback of
a selection that you make (loop playback).
1 Press the
key during playback to set the point
IN/OUT
when you want to start loop playback. The current
position is set as the IN point, and the symbol
appears below the playback position display bar at
that point.
2 Press the
key at the point when you want loop
IN/OUT
playback to stop. The current position is set as the
OUT point, and the symbol appears below the play-
back position display bar at that point. After setting
the OUT point, loop playback begins between the IN
and OUT points.
The
play mode icon appears on the left of the display.
2
TASCAM CD-VT2
To stop loop playback, press either the
key.
IN/OUT
If you press the
key, the loop interval settings are saved,
LOOP
and if you press the
LOOP
interval begins again.
If you press the
key, the loop interval settings (IN
IN/OUT
point and OUT point settings) are canceled.
key or the
LOOP
key again loop playback of the set
Advertisement
Table of Contents
