Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
This unit can be operated with 4 AA batteries or an adapter
(purchased separately).
Using batteries
See "Batteries" on page 10 for information about installing
batteries.
Battery level display
When using batteries, the battery icon in the upper right part
of the display shows the approximate remaining power level of
the batteries.
The remaining power level of the batteries is high.
The remaining power level of the batteries is about half of the
original amount.
The remaining power level of the batteries is low.
The batteries are out of power and the unit power is about to
turn OFF. Put in new batteries.
About Power
Battery life
•
Fully charged new nickel hydride batteries: about 6.5 hours
•
Alkaline batteries: about 5 hours
NOTE
Since this product has special functions, including CD
playback tempo alteration and mic effects, battery life is
shorter compared to other portable CD players.
Battery life varies according to use conditions, including
temperature, humidity and the ON/OFF status of the
various special functions.
When the remaining power level of the batteries you are
using is low, the player may not function properly even
though the battery icon shows that the remaining power
level is high. In this case, change the batteries or use an
AC adapter.
Operation with an AC adapter
Use the TASCAM PS-P520 (sold separately) AC adapter. Do
not use any other adapter because this may cause the player to
malfunction.
Connect the DC plug from the AC adapter to the
jack on this device and connect the AC plug to a standard
outlet.
DC IN 5V
1
TASCAM CD-VT2
Advertisement
Table of Contents
