Sunbeam Verve SR6650 Instruction Booklet

68 resilium shot & spray iron with safety auto-off; 66 stainless shot & spray iron with safety auto-off; 65 platinum shot & spray iron with safety auto-off; 62 platinum shot & spray iron

Hide thumbs

Table Of Contents

Quick Links

Verve

™

Instruction Booklet

This book covers the use and care of the following Verve

SR6800 Verve

SR6850 Verve

68 Resilium

™

SR6650 Verve

SR6600 Verve

66 Stainless Shot & Spray Iron with Safety Auto-Off

™

SR6550 Verve

SR6500 Verve

65 Platinum Shot & Spray Iron with Safety Auto-Off

™

SR6200 Verve

SR6250 Verve

62 Platinum Shot & Spray Iron

™

Please read these instructions carefully

and retain for future reference.

Irons

Shot & Spray Iron with Safety Auto-Off

Irons:

™

Table of Contents

Need help?

Do you have a question about the Verve SR6650 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sunbeam Verve SR6650

Page 1 Verve Verve Irons Irons ® ™ Instruction Booklet Instruction Booklet This book covers the use and care of the following Verve This book covers the use and care of the following Verve Irons: Irons: ™ ™ SR6850 Verve SR6800 Verve ®...
Page 2: Table Of Contents
Contents Sunbeam’s Safety Precautions Features of your Verve Iron Using your Verve Iron The Safety Auto-Off Feature Care and Cleaning of your Verve Iron Ironing Tips & Tricks Ironing Chart Important instructions – retain for future use.
Page 3: Sunbeam's Safety Precautions
If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood.
Page 4: Features Of Your Verve Iron
It simply wipes clean for fuss free maintenance. Exclusive to Sunbeam, this premium soleplate features 172 steam holes to maximise steam distribution.
Page 5 Safety auto-off The iron automatically switches itself off if left in the ironing position (horizontal) for 30 seconds, or in the heel rest position (vertical) for 15 minutes. (For more information on the safety auto off feature see page 7). Power light Illuminates to indicate that the iron is connected to the power outlet and the power...
Page 6: Using Your Verve Iron
3. Turn the steam dial to the desired affecting the steam performance. However in steam setting. very hard water areas, Sunbeam recommends the use of distilled water, or water which has been demineralised. For best performance, we recommend the use...
Page 7: The Safety Auto-Off Feature
Using your Sunbeam Verve Iron (continued) Dry ironing Note: If the tank has run dry, it may be necessary to re-prime the pump after filling Follow steps 1 and 2 above. the iron with water. 3. Select DRY on the steam dial.
Page 8: Care And Cleaning Of Your Verve Iron
Care and Cleaning After each use Cleaning the steam holes 1. Turn the power off and remove the plug To remove build up from the steam holes which may affect steam performance, from the power outlet. use a cotton wool tip moistened in 2.
Page 9: Ironing Tips & Tricks
Ironing Tips and Tricks Tip # 27 - Iron shirts like a pro Tip # 13 - Ironing the seam Start with the collar, working from the outer Always press seams in the same direction edges into the middle. Iron the shoulder they were made.
Page 10: Ironing Chart
Ironing Chart Fabric Temp setting Ironing Ironing recommendation MINIMUM Acrylic Dry iron on reverse side of fabric Min to • MINIMUM Dry iron on reverse side of fabric Acetate while still damp Min to • MINIMUM Nylon Iron on reverse side of fabric Min to •...
Page 11 You are also Alternatively, you can send a written claim entitled to have the goods repaired or to Sunbeam at the address listed below. replaced if the goods fail to be of acceptable On receipt of your claim, Sunbeam will...
Page 12 Sunbeam Corporation Limited 2011. ABN 45 000 006 771 Units 5 & 6, 13 Lord Street Botany NSW 2019 Australia Unit 3, Building D 26 Vestey Drive Mt Wellington Auckland New Zealand Sunbeam Corporation is a division of GUD Holdings Ltd. 6/11...

This manual is also suitable for:

Verve sr6850 Verve sr6550 Verve sr6250 Verve sr6855b