Advertisement
Advertisement
Related Manuals for Sunbeam VERVE Resilium SR6805
Summary of Contents for Sunbeam VERVE Resilium SR6805
- Page 1 VERVE ® SR6805 IRON User Guide SR6805 Sunbeam Resilium ®...
-
Page 2: Table Of Contents
Contents Sunbeam’s Safety Precautions Features of your Verve Iron Using your Verve Iron The Safety Auto-Off Feature Care and Cleaning of your Verve Iron Ironing Tips & Tricks Ironing Chart... -
Page 3: Sunbeam's Safety Precautions
• Never leave an appliance unattended while in use. If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood. -
Page 4: Features Of Your Verve Iron
Safe-Store Strip ™ Resilium non-scratch soleplate ® Resilium is a durable, scratch resistant ® surface that provides a superior glide and prevents rucking. Exclusive to Sunbeam, this premium soleplate features 172 steam holes to maximise steam distribution. - Page 5 Safety auto-off The iron automatically switches itself off if left in the ironing position (horizontal) for 30 seconds, or in the heel rest position (vertical) for 15 minutes. (For more information on the safety auto off feature see page 7). Power light Illuminates to indicate that the iron is connected to the power outlet and the power...
-
Page 6: Using Your Verve Iron
Verve iron without 3. Turn the steam dial to the desired affecting the steam performance. However in steam setting. very hard water areas, Sunbeam recommends the use of distilled water, or water which has been demineralised. For best performance, we recommend... -
Page 7: The Safety Auto-Off Feature
Using your Sunbeam Verve Iron (continued) Dry ironing Note: If the tank has run dry, it may be necessary to re-prime the pump after filling Follow steps 1 and 2 above. the iron with water. 3. Select DRY on the steam dial. -
Page 8: Care And Cleaning Of Your Verve Iron
Care and Cleaning After each use Cleaning To clean the exterior of your iron, wipe 1. Turn the power off and remove the over with a damp soft cloth and wipe dry. plug from the power outlet. 2. Allow the iron to cool before winding Caution: Do not use harsh abrasives, the cord around the built-in cord wrap. -
Page 9: Ironing Tips & Tricks
Ironing Tips and Tricks Tip # 13 - Ironing the seam Tip # 27 - Iron shirts like a pro Start with the collar, working from the Always press seams in the same direction outer edges into the middle. Iron the they were made. -
Page 10: Ironing Chart
Ironing Chart Fabric Temp setting Ironing Ironing recommendation Acrylic Dry iron on reverse side of fabric • Dry iron on reverse side of fabric Acetate while still damp • Nylon Dry iron on reverse side of fabric • SYNTH Polyester Dry iron on reverse side of fabric •... - Page 11 2 year Year 2 years Australia www.sunbeam.com.au 1300 881 861 Units 5 & 6, 13 Lord Street, Botany NSW 2019 Australia New Zealand www.sunbeam.co.nz 0800 786 232 Level 6, Building 5, Central Park, 660-670 Great South Road, Greenlane, Auckland New Zealand...
- Page 12 Central Park, 660–670 Great South Road, Greenlane, Auckland. Sunbeam Corporation Limited | ABN 45 000 006 771 Sunbeam Corporation is a division of GUD Holdings Limited. Sunbeam is a registered trade mark. Verve is a registered trade mark of Sunbeam Corporation.
Need help?
Do you have a question about the VERVE Resilium SR6805 and is the answer not in the manual?
Questions and answers