Page 1
S T I G A T I T A N 12 5 B TIT A N COMB I BRUKSANVISNING SV ..4 KÄYTTÖOHJEET FI ..8 BRUGSANVISNING DA ..12 BRUKSANVISNING NO .16 GEBRAUCHSANWEISUNG DE...20 INSTRUCTIONS FOR USE EN...24 MODE D’EMPLOI FR..28 GEBRUIKSAANWIJZING NL...32...
Page 4
They are there to remind you of the care and atten- The cutting deck is belt driven and intended for use tion required in use. on Stiga Titan 20 B and 16 B. This is what the symbols mean: 2.2 Controls and functions...
Page 5
ENGLISH 3 ASSEMBLY 5 USING THE MACHINE Check that the grass that is to be cut is 3.1 Mechanical connection completely free of foreign objects such Also refer to the machine’s instructions for use. as stones etc. 1. Lower the implement lift and slowly drive the machine straight towards the cutting deck.
Page 6
ENGLISH 5.4 Mowing advice 6.4 Resetting In order to achieve optimum mowing results, fol- Two people are required to reset from the cleaning low the advice below: and service position as follows: • Cut frequently. 1. Person 1 lifts the deck at the front edge so that it releases from catch (7:C).
Page 7
These can be replaced if necessary. 8 SPARE PARTS STIGA genuine spare parts and accessories are de- signed specifically for STIGA machines. Please note that ‘non-genuine’ spare parts and accessories have not been checked or approved by STIGA:...
Need help?
Do you have a question about the 125 B TITAN COMBI and is the answer not in the manual?
Questions and answers