Asus DSL-N12U User Manual page 6

Power LED
1
Off: No power.
On: Device is ready.
Flashing slow: Rescue mode
Flashing quick: WPS is processing.
ADSL LED
2
Solid light: ADSL link is established.
Flashing: No ADSL link or unable to establish ADSL link.
WAN LED
3
Off: No power or no physical connection.
On: Has physical connection to a wide area network (WAN).
LAN LED
4
Off: No power or no physical connection.
On: Has physical connection to a local area network (LAN).
Wi-Fi LED
5
Off: No Wi-Fi signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
Reset button
6
This button resets or restores the system to its factory default settings.
Power (DC-In) port
7
Insert the bundled AC adapter into this port and connect your router to a
power source.
Power switch
8
Press this button to turn the power on/off.
USB 2.0 / USB 1.1 port
9
Insert a USB .0/USB 1.1 device such as USB hard disks or USB flash drives into
this port.
Insert your iPad's USB cable into this port to charge your iPad.
Insert your printer's USB cable into one of these ports to set up your network
printer. For details, refer to the section Setting up your network printer.
LAN 1 ~ 4 ports
10
Connect network cables into these ports to establish LAN connection.
WPS button
11
This button launches the WPS Push Button Configuration process.
Wi-Fi switch
12
Switch to turn the WiFi feature on/off.
ADSL port
13
Connect to a splitter or to a telephone outlet via an RJ-11 cable.
6