Getting Started; Changing The Color Code Ring; Attaching The Brush Head; Charging Your Sonicare - Philips FlexCare 900 series User Manual

ENGLISH
6
4235.020.2275.5.indd 6 4235.020.2275.5.indd 6
N UV sanitizer with integrated charger and cord wrap (select models)
- Not shown: UV light bulb
- Not shown: Sanitizer drip tray
- Not shown: Protective screen for UV light bulb
Note: The contents of the box will vary based on model purchased

Getting started

Changing the color code ring

Sonicare brush heads come with interchangeable color code rings to
identify your brush head.
To change the color code ring:
1 Pull the color code ring from the bottom of the brush head.
2 Install a new ring by slipping one edge of the new ring over the
bottom of the brush head. Then press down on the other side to
snap the ring in place.

Attaching the brush head

1 Align the brush head so the bristles face the front of the handle.
2 Firmly press the brush head down on the metal shaft until it stops.
Note: There is a small gap between the color code ring and the handle.

Charging your Sonicare

1 Plug the charger into a live outlet.
2 Place the handle on the charger.
The fl ashing light on the battery gauge indicates that the toothbrush
,
is charging.

Deluxe recharge gauge:

Indicates amount of charge left in battery
- 3 green LEDs: 75-100%
- 2 green LEDs: 50-74%
18-04-2008 13:33:09 18-04-2008 13:33:09