Socket CompactFlash 56K Modem Card User Manual page 26

1. Complete the Network Information Form in Appendix B.
2. To enter TCP/IP settings, after completing the wizard to create a new dial-up
connection in Step 5, follow these steps to modify the connection:
Windows XP
(a) After completing the wizard in Step 5, the Connect screen will appear for
your new connection. Click on Properties.
(b) Click on the Networking tab. Check Internet Protocol and click on
Properties.
(c) Enter any necessary settings. If needed, click on the Advanced button to
enter DNS, WNS or other settings. When done, click OK.
(d) Click OK again in the main properties screen.
(e) Restart your computer to make sure the changes take effect.
Windows 2000
(a) Right-click on the icon for the connection you just created. In the pop-up
menu, select Properties.
(b) Click on the Networking tab. Check Internet Protocol and click on
Properties.
(c) Enter any necessary settings. If needed, click on the Advanced button to
enter DNS, WNS or other settings. When done, click OK.
(d) Click OK again in the main properties screen. Restart your computer to make
sure the changes take effect.
26