Complete Conversion; Important; W10477533B - Whirlpool W10477533B Installation Instructions Manual

To Convert Oven Burner
1. Open the oven door and remove oven racks, oven tray, and
flame spreader and set aside.
2. Lift oven burner. The orifice spud is behind the oven burner
air shutter.
A
A. Oven burner
B. Air shutter
3. Locate Natural gas orifice spud stamped "47" in the package
containing literature supplied with the range.
4. Use a " combination wrench and remove the LP gas orifice
spud.
5. Install the number "47" LP gas spud.
A
A. Natural gas oven orifice spud stamped with "47"
IMPORTANT: Do not overtighten.
16
6. Place LP gas oven burner spud in plastic parts bag along
7. Reinstall oven burner.
8. Reinstall oven racks, oven tray and flame spreader.
1. Refer to the "Make Gas Connection" section for properly
2. Turn the manual shutoff valve in the gas supply line to the
3. Refer to "Check Operation of Cooktop Burners" in the
B
4. Close the oven door and turn the knob to "OFF."
5. Refer to the "Complete Installation" section to complete this
with LP gas cooktop burner spuds for future use and keep
with the bag containing literature.

Complete Conversion

connecting the range to the gas supply.
open position.
"Electronic Ignition System" section for proper burner
ignition, operation and burner flame adjustments.
IMPORTANT: You may have to adjust the "LO" setting for
each cooktop burner.
Checking for proper cooktop and oven burner flames is very
important. The small inner cone should have a very distinct
blue flame ¼" to ½" (0.64 cm to 1.3 cm) long. The outer cone
is not as distinct as the inner cone. Natural gas flames do not
have yellow tips.
procedure.