Batch Mode Beep; Batch Mode Storage - Honeywell XENON 1902 User Manual

Default = Batch Mode Off.
* Batch Mode Off
Automatic Batch Mode
Inventory Batch Mode

Batch Mode Beep

When using Batch Mode, scan Batch Mode Beep On to program the scan-
ner to click when each bar code is read to storage. Default = Batch Mode
Beep On.
Batch Mode Beep Off
* Batch Mode Beep On

Batch Mode Storage

When a scanner is storing data during a Batch Mode process, you can
select whether the data is stored in Flash memory or in RAM.
Flash Storage: The scanner writes any untransmitted data to flash mem-
ory prior to powering down. The data will still be there when the scanner
powers back up. However, the scanner will power down, even with untrans-
mitted data, if it reaches a power down timeout or if the battery power is
very low.
3 - 17