To Clear One Or All Prefixes Or Suffixes - Honeywell XENON 1902 User Manual

symbology to which you want to apply the prefix or suffix. For
example, for Code 128, Code ID is "j" and Hex ID is "6A".
Step 3. Scan the 2 hex digits from the
cover of this manual or scan 9, 9 for all symbologies.
Step 4. Determine the hex value from the
Page 1252),
to enter.
Step 5. Scan the 2 digit hex value from the
back cover of this manual.
Step 6. Repeat Steps 4 and 5 for every prefix or suffix character.
Step 7. To add the Code I.D., scan 5, C, 8, 0.
To add AIM I.D., scan 5, C, 8, 1.
To add a backslash (\), scan 5, C, 5, C.
Note: To add a backslash (\) as in Step 7, you must scan 5C twice – once
to create the leading backslash and then to create the backslash
itself.
Step 8. Scan Save to exit and save, or scan Discard to exit without saving.
Repeat Steps 1-6 to add a prefix or suffix for another symbology.
Example: Add a Suffix to a specific symbology
To send a CR (carriage return)Suffix for U.P.C. only:
Step 1. Scan Add Suffix.
Step 2. Determine the 2 digit hex value from the Symbology Chart
(included in the
U.P.C..
Step 3. Scan 6, 3 from the
manual.
Step 4. Determine the hex value from the
Page 1252),
Step 5. Scan 0, D from the
manual.
Step 6. Scan Save, or scan Discard to exit without saving.

To Clear One or All Prefixes or Suffixes

You can clear a single prefix or suffix, or clear all prefixes/suffixes for a
symbology. If you have been entering prefixes and suffixes for single sym-
bologies, you can use Clear One Prefix (Suffix) to delete a specific char-
acter from a symbology. When you Clear All Prefixes (Suffixes), all the
prefixes or suffixes for a symbology are deleted.
5 - 2
beginning on page A-4, for the prefix or suffix you wish
Symbology Chart,
Programming Chart
beginning on page A-4, for the CR (carriage return).
Programming Chart
Programming Chart
ASCII Conversion Chart (Code
Programming Chart
beginning on page A-1) for
inside the back cover of this
ASCII Conversion Chart (Code
inside the back cover of this
inside the back
inside the