Flexible Power Management - Honeywell XENON 1902 User Manual

Flexible Power Management

If you are experiencing network performance issues, and suspect the scanner is
interfering with other devices, you can turn down the power output of the scan-
ner. This reduces the range between the scanner and a base or an Access
Point as shown in the following illustration:
802.11 1902
LAN Scanner
Scan one of the bar codes below to set the scanner's power output to Full
Power (100%) [2.5mW, 4dBm], Medium Power (35%) [.875mW, 0dBm],
Medium Low Power (5%) [.125mW, -9dBm], or Low Power (1%, .025mW,
-16dBm). Default = Full Power.
For the new power setting to take effect, the scanner and the base or Access
Point must be reset. See Reset Scanner and Base/Access Point (page 3-
16).
* Full Power
Medium Power
Medium Low Power
Low Power
3 - 15