Step 5. Order Equipment; Step 6. Configure T7350 - Honeywell T7350 System Engineering

Step 5. Order Equipment

After compiling a bill of materials through completion of the
previous application steps, refer to Table 10, Ordering
Information.
Part Number
T7350H1009 Communicating Thermostat with three heating and
three cooling digital outputs.
T7350H1017 Communicating Thermostat with two modulating
outputs, one heating and one cooling digital output.
T7771A Remote Temperature Sensor.
T7770A1006 Remote Wall Module.
T7770B1046 Remote Wall Module.
T7770C1044 Remote Wall Module.
T7770D1000 Remote Wall Module.
ORKS ®
AK3798 L W
ON
ORKS ®
AK3797 L W
ON
ORKS ®
AK3799 L W
ON
209541B FTT Network Termination Module.
H7625 Remote Humidity Sensors
H7635
C7089A Outdoor Air Sensors.
C7170A,
C7031G2014
Duct Discharge Air Sensors:
C7041B 6 inch probe.
C7041C 18 inch probe.
C7041J 150 inch averaging.
C7770A 6 inch probe.
50000452- Troubleshooting Cable.
001
50000083- Thermostat Interface Module (TIM).
001
PDA Qualified Palm OS PDA.
50000314- PDA Configuration Software.
001

Step 6. Configure T7350

Use Excel L S ™ Software to configure the T7350H
ON PEC
Thermostat for specific applications. The Excel L
User's Guide, form 74-2937, provides software operation
instructions for this personal computer based application.
Table 10. Ordering Information.
Product Description
Bus (Non-Plenum), 1 pair.
Bus (Plenum rated), 1 pair.
Bus (Plenum rated), 2 pair.
S ™
ON PEC
T7350 COMMERCIAL PROGRAMMABLE THERMOSTAT
• Optional heat pump control.
• Isolated auxiliary digital output.
• Isolated auxiliary digital output.
• Pushbutton setpoint adjustment with LED indicators.
• Occupied/unoccupied override (bypass) with LED.
• L W
ON ORKS
• Basic model with room temperature sensor.
• ± setpoint change.
• ± setpoint change.
• OCC button and LED.
• OCC button and LED.
—
—
—
—
—
—
—
One Troubleshooting Cable required for each
installation technician.
One TIM required for each installation technician. Note
that a network tool such as L
need for a TIM.
One PDA required for each installation technician.
Refer to the PDA Configuration Software for an up-to-
date list of qualified PDA hardware. Note that a network
tool such as L
ON
One Configuration software package can be used to
program multiple PDAs. Note that a network tool such
as L S ™ eliminates the need for a PDA.
ON PEC
17
Comments
®
Bus jack.
S ™ eliminates the
ON PEC
S ™ eliminates the need for a PDA.
PEC
63-4368