Signal Indicator Mirrors (If Equipped); Using Speed Controls; Setting Speed Control - Ford 2011 Fiesta Owner's Manual

Driver Controls

Signal indicator mirrors (if equipped)

When the turn signal is activated,
the outer portion of the appropriate
mirror housing will blink.
This provides an additional warning
to other drivers that your vehicle is
about to turn.
SPEED CONTROL (IF EQUIPPED)
With speed control set, you can maintain a set speed without keeping
your foot on the accelerator pedal.
WARNING: Do not use the speed control in heavy traffic or on
roads that are winding, slippery or unpaved.

Using speed controls

The speed controls are located on the steering wheel. The following
buttons work with speed control:
SET+: Press to set a speed or to
increase a set speed.
CAN (Cancel)/RES (Resume):
Press to cancel or resume a set
speed.
SET–: Press to decrease a set
speed.
OFF: Press to turn speed control off.
ON: Press to turn speed control on.

Setting speed control

To set speed control:
4. Press and release ON.
5. Accelerate to the desired speed.
6. Press and release SET+.
7. Take your foot off the accelerator pedal.
8. The indicator
126
2011 Fiesta (fie)
Owners Guide, 1st Printing
USA (fus)
light on the instrument cluster will turn on.