Changing The Tires - Ford 2010 Fusion Hybrid Owner's Manual

Ford 2010 fusion hybrid automobile owner's manual
Hide thumbs Also See for 2010 Fusion Hybrid:
Table of Contents

Advertisement

Relay Location
4
High Current
5
High Current
6
High Current
7

CHANGING THE TIRES

If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly
and slowly move to a safe place on the side of the road.
Note: The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare tire is in use. To restore the full functionality
of the monitoring system, all road wheels equipped with tire pressure
monitoring sensors must be mounted on the vehicle.
Have a flat serviced by an authorized dealer in order to prevent damage
to the TPMS sensors, refer to Tire pressure monitoring system
(TPMS) in the Tires, Wheels and Loading chapter. Replace the spare
tire with a road tire as soon as possible. During repairing or replacing of
the flat tire, have the authorized dealer inspect the TPMS sensor for
damage.
WARNING: The use of tire sealants may damage your Tire
Pressure Monitoring System and should not be used.
WARNING: Refer to Tire pressure monitoring system (TPMS)
in the Tires, Wheels and Loading chapter for important
information. If the tire pressure monitor sensor becomes damaged, it
will no longer function.
2010 Fusion Hybrid (hfv)
Owners Guide, 1st Printing
USA (fus)
Roadside Emergencies
Relay Type
Rear window defogger
Micro
Powertrain control module
Micro
Vacuum pump cut-off
Micro
Solid State
Vacuum pump
Function
243

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents