Ford 2009 E-150 Owner's Manual page 299

High fluid level
Fluid levels above the safe range may result in transmission failure.
An overfill condition of transmission fluid may cause shift and/or
engagement concerns and/or possible damage.
High fluid levels can be caused by an overheating condition.
Adjusting automatic transmission fluid levels
Before adding any fluid, make sure the correct type is used. The type of
fluid used is normally indicated on the dipstick. Refer to Maintenance
product specifications and capacities in this chapter.
Use of a non-approved automatic transmission fluid may cause
internal transmission component damage.
If necessary, add fluid in 1/2 pint (250 ml) increments through the filler
tube until the level is correct.
If an overfill occurs, excess fluid should be removed by an authorized
dealer.
2009 Econoline (eco)
Owners Guide, 1st Printing
USA (fus)
Maintenance and Specifications
DON'T ADD IF IN CROSSHATCHED AREA • CHECK WHEN HOT
ADD COLD HOT DO NOT ADD
DON'T ADD IF IN CROSSHATCHED AREA • CHECK WHEN HOT
ADD COLD HOT DO NOT ADD
IDLING IN PARK
IDLING IN PARK
299