Ford 2009 E-150 Owner's Manual page 88

Locks and Security
Automatic disarming
Switching the ignition to the on position with a coded key disarms the
vehicle.
Replacement keys
If your keys are lost or stolen and you don't have an extra coded key,
you will need to have your vehicle towed to an authorized dealer. The
key codes need to be erased from your vehicle and new coded keys will
need to be programmed.
Replacing coded keys can be very costly. Store an extra programmed key
away from the vehicle in a safe place to help prevent any
inconveniences. Please visit an authorized dealer to purchase additional
spare or replacement keys.
Programming spare keys
A maximum of eight keys can be coded to your vehicle. Only
SecuriLock™ keys can be used. To program a coded key yourself, you
will need two previously programmed coded keys (keys that already
operate your vehicle's engine) and the new unprogrammed key(s) readily
accessible for timely implementation of each step in the procedure.
If two previously programmed coded keys are not available, you must
bring your vehicle to your authorized dealer to have the spare coded
key(s) programmed.
Please read and understand the entire procedure before you begin.
1. Insert the first previously
4
programmed coded key into the
3
ignition and turn the ignition from
5
the 3 (off) position to the 4 (on)
position (maintain ignition in the 4
2
(on) position for at least one
second, but no more than
10 seconds).
1
2. Turn ignition from the 4 (on)
position back to the 3 (off) position
in order to remove the first coded key from the ignition.
3. Within 10 seconds of removing the first coded key, insert the second
previously programmed coded key into the ignition and turn the ignition
from the 3 (off) position to the 4 (on) position (maintain ignition in the
4 (on) position for at least one second but no more than 10 seconds).
88
2009 Econoline (eco)
Owners Guide, 1st Printing
USA (fus)