To Put Your Vehicle In Gear; To Put Your Vehicle In P (Park) - Ford 2007 Explorer Owner's Manual

P (Park)
This position locks the transmission
and prevents the rear wheels from
turning.

To put your vehicle in gear:

• Start the engine
• Depress the brake pedal
• Press the gearshift release button
on the front of the lever and
move the gearshift lever into the
desired gear

To put your vehicle in P (Park):

• Come to a complete stop
• Move the gearshift lever and
securely latch it in P (Park)
Always set the parking brake fully and make sure the gearshift is
latched in P (Park). Turn the ignition to the LOCK position and
remove the key whenever you leave your vehicle.
R (Reverse)
With the gearshift lever in R (Reverse), the vehicle will move backward.
Always come to a complete stop before shifting into and out of R
(Reverse).
N (Neutral)
With the gearshift lever in N (Neutral), the vehicle can be started and is
free to roll. Hold the brake pedal down while in this position.
D (Drive) with Overdrive
The normal driving position for the best fuel economy. Transmission
operates in gears one through five.
2007 Explorer (exp)
Owners Guide (post-2002-fmt)
USA (fus)
Driving
259