Table of Contents
Advertisement
A
X
4
5
F
-
4
D
S
e
r
i
e
A
X
4
5
F
-
4
D
S
e
r
i
e
6. From the Windows 2000 Setup screen, press the Enter key. Setup will now load all device files and then continue the Windows 2000
installation.
*********************************************************
Installing Driver in Existing Windows 2000 System
*********************************************************
WARNING: If you will be moving the boot drive containing the existing Windows 2000 operating system to the SATA150 connector, the
SATA150 driver MUST be loaded on to this hard drive while it is still attached to your existing hard drive controller. Do not
attach this drive or any other hard drive to the SATA150 connector before completing this step.
After enabling the SATA150 IDE controller and rebooting your system, Windows 2000 setup will show a "New Hardware Found" dialog
box. Under Windows 2000, "PCI Mass Storage Controller" will be displayed.
1. Choose "Search for a suitable driver for my device (Recommended)" from the list, and then press "Enter".
2. Choose "Specify a location." and then press "Next"
3. Choose "Mass Storage controller" and press "next" and next screen press "finish"
4. Insert the Promise SATA150 driver diskette into drive A.
5. Type "A:\" in the text box that appears. Press "OK ".
4a. Insert the Bonus CD in CD-ROM.
s
s
124
O
n
l
i
n
e
M
a
n
u
a
l
O
n
l
i
n
e
M
a
n
u
a
l
Hide quick links:
Advertisement
Table of Contents
