Edit - AMX TPDOC Instruction Manual

Figure 52
Save screen
Figure 53
F3-Logo menu
Figure 54
Edit logo menu
TPDOC Touch Panel Documenter and Librarian Program
The Save screen (Figure 52) appears when the drawing file is loaded.
9.
10. At the blinking cursor, enter a name and description for the file (57 characters
maximum). Press Enter to save the file. Press Esc if you want to abort the Save
operation. The file name and description will be saved. The first eight
characters are used as the file name along with a .LGO or .LGC file extension.
Also, if you use the file name of the last file sent or received (default), a Will
Overwrite message appears. If you press Enter, the previously saved file is
replaced with the current file.

Edit

These steps describe how to send logo files to your touch panel. You must have a
mouse and mouse driver installed for this operation.
1. Run the TPDOC program and press the F3-Logo key to open the Logo menu
(Figure 53). Use the arrow keys to highlight the Edit menu option.
Press Enter to open the Edit logo menu (Figure 54).
2.
3. Select the appropriate option for your touch panel and press Enter to open the
Open Logo menu (Figure 55). The Open Logo menu shows the list of available
logo (.LGO or .LGC) files.
Application and Use 27