Operating Instructions; Led Display On/Off; Operating Modes; Static Color Mode - American DJ Mega Bar RGBA User Instructions

Table of Contents

Advertisement

Mega Bar RGBA

LED Display On/Off:

To set the LED display to turn off after 20 seconds, press the MODE
and DOWN buttons at the same time. Now the display will disappear
after 20s. Press any button to turn the display on again. To allow the
display to stay On at all times, press the MODE and UP buttons at
the same time.

Operating Modes:

The Mega Bar RGBA has six operating modes:
• Sound-Active mode - The unit will react to sound, chasing through
the built in programs.
• Built-In Program - There are 22 built-in programs to choose from.
• Static Color Mode - There are 15 colors to choose from.
• Auto Mode - A auto program will run with adjustable fade speed.
• RGBA Mode - Choose one of the four colors to remain static or
adjust the intensity of each color to make your desired color.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller.

Static Color Mode:

1. Plug the fixture in and press the MODE button until "C0.XX" is
displayed.
2. There are 15 colors to choose from. Select your desired color by
pressing the UP and DOWN buttons. After you have selected
your desired color you can activate strobing by pressing the SET
UP button to enter the Flash (strobe) mode.
3. "FS.XX" will now be displayed, this is Flash mode. The Flash can
be adjusted between "FS.00" (flash off) to "FS.99" (fastest flash).
RGBA Dimmer Mode:
1. Plug the fixture in and press the MODE button until "rgbA" is dis-
played. Then press the SET UP button to adjust intensity of the
individual colors.
2. When "r.XXX" is displayed you are in Red dimming mode. Press
the UP and DOWN buttons to adjust intensity.
3. When "G.XXX" is displayed you are in Green dimming mode.
Press the UP and DOWN buttons to adjust intensity.
4. When "b.XXX" is displayed you are in Blue dimming mode. Press
the UP and DOWN buttons to adjust intensity.
ADJ Products, LLC - www.adj.com - Mega Bar RGBA User Manual Page 7

Operating Instructions

Mega Bar RGBA
5. When "A.XXX" is displayed you are in Amber dimming mode.
Press the UP and DOWN buttons to adjust intensity.
6. After you have adjusted the RGBA colors to make your desired
color you can then activate strobing by pressing the SET UP but-
ton to enter the Flash (strobe) mode.
7. "FS.XX" will be displayed, this is Flash mode. The Flash can be
adjusted between "FS.00" (flash off) to "FS.99" (fastest flash).
Built-In Program Mode:
1. Plug the fixture in and press the MODE button until "Pr.XX" is dis-
played. "XX" represents a number from 1-22. Use the UP or DOWN
buttons to scroll through the 22 programs. Programs 21 and 22
have adjustable colors. Once you have found your desired program
press the SET UP button.
2. Pressing the SET UP button will display "SP.XX". When this is dis-
played you can adjust the running speed of your desired program.
Use the UP or DOWN button to adjust the speed between "SP.01"
(slowest) and "SP.99" (fastest). Once you have set your desired run-
ning speed, you can press the SET UP button to to enter the Fade
adjustment mode.
2. Pressing the SET UP button will display "Fd.XX". When this is dis-
played you can adjust the fade speed of your desired program.
Use the UP or DOWN button to adjust the speed between "Fd.01"
(fastest) and "Fd.99" (slowest) or "Fd.00" (Off). Once you have set
your desired fade speed, you can press the SET UP button to to
enter the Flash (Strobe) mode.
3. After pressing SET UP, "FS.XX" will be displayed, this is Flash mode.
The Flash can be adjusted between "FS.00" (flash off) to "FS.99"
(fastest flash).
PROGRAMS 21 & 22 - If you have chosen programs 21 or 22, after
the Flash mode, press the SET UP button. "C1.XX" will be displayed.
This is the base color, use the UP and DOWN buttons to scroll
through the 15 colors. Once you have chosen your base color, press
the SET UP button again so that"C2.XX" is displayed. This is the
moving color, use the UP and DOWN buttons to scroll through the 15
colors.
Sound Active Mode:
In this mode the Mega Bar RGBA will react to sound, and chase
through the different colors.
ADJ Products, LLC - www.adj.com - Mega Bar RGBA User Manual Page 8
Operating Instructions

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents