Download Print this page
American DJ X-Move Laser User Instructions
Hide thumbs Also See for X-Move Laser:

Advertisement

User Instructions

5/08
American DJ
®
6122 S. Eastern Ave.
Los Angeles CA. 90040
www.americandj.com
X-Move Laser
Unpacking:
Thank you for purchasing the X-Move Laser™ by Ameri-
can DJ
. Every X-Move Laser™ has been thoroughly tested and has
®
been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fixture for any
damage and be sure all equipment necessary to operate the unit has
arrived intact. In the event damage has been found or parts are miss-
ing, please contact our toll free customer support number for further
instructions. Please do not return this unit to your dealer without con-
tacting customer support first.
Introduction:
The X-Move Laser™ is a six channel DMX intelligent,
moving head, mini laser fixture. The X-Move Laser™ can operate as
a stand alone fixture, in a Master/Slave configuration, or under DMX
control. The X-Move Laser™ is a sound active fixture, but it can also be
controlled via DMX. For best results use fog or special effects smoke to
enhance the beams projections.
Customer Support:
American DJ
port line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.americandj.com for any com-
ments or suggestions. For service related issue please contact Ameri-
can DJ
. Service Hours are Monday through Friday 9:00 a.m. to 5:00
®
p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact American DJ customer support.
PLEASE recycle the shipping carton whenever possible.
American DJ
- www.americandj.com - X-Move Laser Instruction Manual Page 2
©
®
General Introduction
provides a toll free customer sup-
®

Advertisement

loading

Summary of Contents for American DJ X-Move Laser

  • Page 1: User Instructions

    The X-Move Laser™ can operate as a stand alone fixture, in a Master/Slave configuration, or under DMX control. The X-Move Laser™ is a sound active fixture, but it can also be controlled via DMX. For best results use fog or special effects smoke to enhance the beams projections.
  • Page 2 V IS IB L E L A S E R R A D IAT IO N The X-Move Laser carries a 90 day limited warranty. Please fill out the -AV O ID D IR E C T E Y E E X P O S U R E W AV E L E N G T H : 53 2nm/G R E E N Ma x.
  • Page 3 Figure 4 ment angle (left to right to left) is 160°. Tilt movement angle is 90°. American DJ - www.americandj.com - X-Move Laser Instruction Manual Page 7 American DJ - www.americandj.com - X-Move Laser Instruction Manual Page 8 American DJ - www.americandj.com - X-Move Laser Instruction Manual Page 9...
  • Page 4 1. Tap the MENU button until “I PAN” is displayed, press ENTER. 2. The fixture will now run a self test. 1. The X-Move Laser™ is a six DMX channel DMX fixture. See Either “NO” or “I” will be displayed.
  • Page 5 50 - 70 MOVEMENT 3 American DJ - www.americandj.com - X-Move Laser Instruction Manual Page 15 American DJ - www.americandj.com - X-Move Laser Instruction Manual Page 16 American DJ - www.americandj.com - X-Move Laser Instruction Manual Page 17 American DJ - www.americandj.com - X-Move Laser Instruction Manual Page 18...
  • Page 6: Warranty

    Warranty: 90 Days of the product; if the product has been repaired or serviced by anyone other than the American DJ, Inc. factory unless prior written authorization was issued to purchaser by American DJ, Inc.; if the *Voltage is preset at the factory and can not be changed by the user.