Operating Modes; Built-In Program Mode - American DJ TRIBAR Spot User Instructions

TRIBAR Spot
LED Display On/Off:
To make the display stay ON all of the time
press the MODE and UP buttons at the same time. To make the dis-
play turn OFF after 20 seconds, press the MODE and DOWN buttons
at the same time.

Operating Modes:

The TRIBAR Spot has six operating modes:
• Sound-Active mode - The unit will react to sound, chasing through the
built in programs.
• Built-In Program - There are 22 built-in programs to choose from.
• Auto Mode - This will run a automatic program.
• Static Color Mode - There are 7 colors to choose from.
• RGB Dimmer Mode - Choose one of the three colors to remain stat-
ic or adjust the intensity of each color to make your desired color.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller such as
as the ADJ Show Designer™.
Sound Active Mode:
In this mode the TRIBAR Spot will react to sound, and chase through the
different colors.
1. Plug the fixture in and press the MODE button until "SU.XX" is dis-
played. "XX" represents the sound sensitivity setting (0-31) currently
displayed. Use the UP or DOWN buttons to adjust the
sensitivity. "SU.01" is the least sensitive, "SU.31" is the most.
2. The fixture will now change via sound.
3. Press the SET UP button and FS.XX" will be displayed, this is Flash
mode. The Flash can be adjusted between "FS.00" (flash off) to
"FS.99" (fastest flash). After you have either activated or chosen not
to activate the flash mode, press the SET UP button.

Built-In Program Mode:

1. Plug the fixture in and press the MODE button until "Pr.XX" is dis-
played. "XX" represents a number from 1-22. Use the UP or DOWN
buttons to scroll through the 22 programs. Programs 21 and 22
have adjustable colors. Once you have found your desired program
press the SET UP button.
2. Pressing the SET UP button will display "SP.XX". When this is dis-
played you can adjust the running speed of your desired program.
Use the UP or DOWN button to adjust the speed between "SP.01"
ADJ Products, LLC - www.adj.com - TRIBAR Spot User Manual Page 7
Operating Instructions TRIBAR Spot
(slowest) and "SP.99" (fastest). Once you have set your desired run-
ning speed, you can press the SET UP button to to enter the Fade
adjustment mode.
2. Pressing the SET UP button will display "Fd.XX". When this is dis-
played you can adjust the fade speed of your desired program.
Use the UP or DOWN button to adjust the speed between "Fd.01"
(fastest) and "Fd.99" (slowest) or "Fd.00" (Off). Once you have set
your desired fade speed, you can press the SET UP button to to
enter the Flash (Strobe) mode.
3. After pressing SET UP, "FS.XX" will be displayed, this is Flash mode.
The Flash can be adjusted between "FS.00" (flash off) to "FS.99"
(fastest flash).
• PROGRAMS 21 & 22 - If you have chose programs 21 or 22, after
the Flash mode, press the SET UP button. "C1.OX" will be displayed.
This is the base color, use the UP and DOWN buttons to scroll
through the 7 colors. Once you have chosen your base color, press
the SET UP button again so that"C2.OX" is displayed. This is the
moving color, use the UP and DOWN buttons to scroll through the 7
colors.
Auto Run Mode:
1. Plug the fixture in and press the MODE button until "AUTO", is dis-
played.
2. Press the SET UP button and FS.XX" will be displayed, this is Flash
mode. The Flash can be adjusted between "FS.00" (flash off) to
"FS.99" (fastest flash). After you have either activated or chosen not
to activate the flash mode, press the SET UP button.
3. Once you press the SET UP button "Fd.XX" will be displayed. When
this is displayed you are able to adjust the fade speed of the auto
run. Use the UP or DOWN button to adjust the speed between
"Fd.01" (fastest) and "Fd.99" (slowest) or "Fd.00" (Off).
Static Color Mode:
1. Plug the fixture in and press the MODE button until "CO.-X" is dis-
played.
2. There are 7 colors to choose from. Select your desired color by
pressing the UP and DOWN buttons. After you have selected your
desired color you can activate strobing by pressing the SET UP but-
ton to enter the Flash (strobe) mode.
3. "FS.XX" will be displayed, this is Flash mode. The Flash can be
ADJ Products, LLC - www.adj.com - TRIBAR Spot User Manual Page 8
Operating Instructions