American DJ Tri Image User Instructions
American DJ Tri Image User Instructions

American DJ Tri Image User Instructions

Three color, two channel, dmx intelligent, laser effect

Advertisement

Quick Links

User Instructions
Rev. 10/09
Tri Image™
Introduction:
Thank you for purchasing the American DJ
The Tri Image™ is a unique three color, two channel, DMX intelligent,
laser effect that creates different patterns. This unit can be used as a
stand alone, sound-active unit or in a Master/Slave configuration. The
unit can also be controlled via DMX controller. The unit's sound sen-
sitivity may be adjusted by a sensitivity adjustment on the back of the
unit. The unit may be mounted in either a horizontal or vertical position.
For a dramatic laser show use several Tri Images™ together.
Unpacking:
Every Tri Image™ has been thoroughly tested and has
been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If
the carton appears to be damaged, carefully inspect the unit for any
damage and be sure all accessories necessary to operate the unit
have arrived intact. In the event damage has been found or parts are
missing, please contact our toll free customer support number for fur-
ther instructions. Please do not return the unit to your dealer without
first contacting customer support.
Customer Support:
American DJ
support line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.americandj.com for any com-
ments or suggestions. For service related issue please contact Ameri-
can DJ
. Service Hours are Monday through Friday 9:00 a.m. to 5:00
®
p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2610
E-mail:
support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact American DJ customer support.
PLEASE recycle the shipping carton whenever possible.
American DJ
- www.americandj.com - Tri Image™ Instruction Manual Page 2
©
®
General Introduction
Tri Image.
®
provides a toll free customer
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tri Image and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for American DJ Tri Image

  • Page 1 Tri Image. ™ ® The Tri Image™ is a unique three color, two channel, DMX intelligent, laser effect that creates different patterns. This unit can be used as a stand alone, sound-active unit or in a Master/Slave configuration. The unit can also be controlled via DMX controller. The unit’s sound sen- sitivity may be adjusted by a sensitivity adjustment on the back of the unit.
  • Page 2 • During long periods of non-use, disconnect the unit’s main power. • Always mount this unit in safe and stable matter. The Tri Image™ carries a 90 day limited warranty. Please fill out the • Power cords should be routed so they are not likely to be walked enclosed warranty card to validate your purchase.
  • Page 3: Non-Interlocked Housing Warning

    NON-INTERLOCKED HOUSING WARNING After setting up, and before public use, test laser to ensure proper The Tri Image™ contains high power laser devices internally. Do not function. Do not use if any defect is detected. Do not use if laser...
  • Page 4: Laser Warning Labels

    DMX signal to another DMX fixture, or transmit a Master/Slave signal to the next Tri Image™ in the chain. For best results in DMX or Master/ Slave mode terminate this jack if it is the last unit in the chain. See “Terminator”...
  • Page 5 The Tri Image™ is a two channel DMX unit. The DMX address is set gle controller, as long as all fixtures and the controller are DMX com- on the side panel of the Tri Image. ™ Your unit and your DMX controller pliant. To ensure proper DMX data transmission, when using several require a standard 3-pin XLR connector for data input and data output.
  • Page 6: Power Supply

    Master/Slave configuration. It can behavior. A terminator is a 90-120 ohm 1/4 watt resistor which is con- also operate via DMX controller. The Tri Image™ is ready to be nected between pins 2 and 3 of a male XLR connector (DATA + and plugged in out of the box.
  • Page 7: Dipswitch Chart

    4. Use the sensitivity knob on the back of the master unit to make it more or less sensative to sound. American DJ - www.americandj.com - Tri Image™ Instruction Manual Page 13 American DJ - www.americandj.com - Tri Image™ Instruction Manual Page 14 ©...
  • Page 8 COLOR AND LINES CHANGE EVERY 3 SEC. 233 - 255 COLOR AND LINES CHANGE EVERY 5 SEC. American DJ - www.americandj.com - Tri Image™ Instruction Manual Page 15 American DJ - www.americandj.com - Tri Image™ Instruction Manual Page 16 © ® ©...
  • Page 9: Warranty

    American DJ, Inc. concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the American DJ, Inc. factory unless prior written authorization was issued to purchaser by American DJ, Inc.; if the product is damaged because not properly maintained as set forth in the instruction manual.
  • Page 10: Specifications

    American DJ ® American DJ World Headquarters: 6122 S. Eastern Ave. Los Angeles, CA 90040 USA Tel: 323-582-2650 / Fax: 323-725-6100 Web: www.americandj.com / E-mail: info@americandj.com American DJ - www.americandj.com - Tri Image™ Instruction Manual Page 19 © ®...

Table of Contents