Advertisement
64B LED PRO
Operating Modes:
There are seven different ways to operate the 64B LED PRO:
Color Mode:
In this mode you can choose a desired color to remain static.
1. Plug the fixture in and press the MODE button until "C.L.X" is dis-
played. "X" = 0-7.
2. Press the UP or DOWN buttons to adjust "X" between 0-7. 0 is
blackout, 1 is red, 2 is green, 3 is blue, 4 is purple, 5 is yellow, 6 is
cyan, and 7 is white.
Color Change Mode:
In this mode the 64B LED PRO will change through the different col-
ors.
1. Plug the fixture in and press the MODE button until "J.XX" is dis-
played. "XX" = 01-99 which is the adjustable rate of the speed
change.
2. Press the UP or DOWN buttons to adjust the speed of the color
change.
Color Fade Mode:
In this mode the 64B LED PRO will fade in and out of the different
colors.
1. Plug the fixture in and press the MODE button until "F.XX" is dis-
played. "XX" = 01-99 which is the adjustable rate of the speed
change.
2. Press the UP or DOWN buttons to adjust the speed of the color
change.
Auto Mode:
1. Plug the fixture in and press the MODE button until "A--" is dis-
played.
Sound Active Mode:
In this mode the 64B LED PRO will react to sound, changing and fad-
ing through the different colors.
1. Plug the fixture in and press the MODE button until "S.XX" is dis-
played. "XX" = 00-31 which is adjustable sound sensitivity levels.
2. The fixture will now change via sound. You can adjust the sound
American DJ Supply
- www.americandj.com - 64B LED PRO Instruction Manual Page 7
©
®
Operating Instructions
64B LED PRO
sensitivity by pressing the UP and DOWN buttons. The sound sen-
sitivity can be adjusted from 00 - 31, 00 being the least sensi
tive, and 31 being the most sensitive.
Master-Slave Operation:
This function will allows you to link units together to run in a Master-
Slave mode. In Master-Slave operation one unit will act as the con-
trolling unit and the others will react to the controlling units built-in
programs. Any unit can act as a Master or as a Slave however, only
one unit can be programmed to act as the "Master."
1. Daisy chain your units via the XLR connector on the rear of
the unit. Use standard XLR microphone cables to link your
units together. Remember that the Male XLR connector is the
input and the Female XLR connector is the output. The first
unit in the chain (master) will use the female XLR connector
only. The last unit in the chain will use the male XLR
connector only.
2. Using the Master unit, choose your desired mode and connect
the "Slave" unit or units.
3. For the "Slave" unit(s) press the MODE button until "S.L.A." is dis-
played. They will now follow the "Master" unit.
DMX Mode:
There are two DMX Modes to choose from. One mode is a 3 Channel
Mode, and the other is a 6 Channel Mode. Operating through a DMX
controller give the user the freedom to create their own programs tai-
lored to their own individual needs. Operating through a DMX control-
ler give the user the freedom to create their own programs tailored to
their own individual needs. This function also allows you to use your
fixtures as spot lights.
1. This function will allow you to control each individual fixture's
traits with a standard DMX 512 controller such as the
Elation
Show Designer™ or the Elation
®
2. The 64B LED PRO uses three or six DMX channels to operate.
Please see pages 9-10 for the DMX traits.
3. To run your fixture in DMX mode, plug in the fixture via the XLR
connections to any standard DMX controller. Follow the set-up
specifications that come with your DMX controller.
American DJ Supply
- www.americandj.com - 64B LED PRO Instruction Manual Page 8
©
®
Operating Instructions
-
DMX Operator.™
®
Advertisement
