Auto Mode; Sound Active Mode - American DJ LED Messenger User Instructions

LED Messenger
In Auto Mode the LED Messenger will cycle through the dif-
ferent programs as well as your selected phrase that is loaded
into "Pr.01".
Auto Mode via on board control -
1. Press the MODE button, until "AUTO" is displayed.
2. Press the SET UP button, "S.XXX" will now be displayed. You
can now set the speed of the Auto Mode. The speed is adjust-
able from "S001"-"S100". 100 being the fastest speed. Press
the SET UP button again once you have found your desired
scroll speed.
3. "N.XXX" will now be displayed. You can now set the amount
of times each program will cycle through Auto Mode. The cycle
rate is adjustable from "N.001"-"N.100". 001 will have a pro-
gram cycle once and then move on to the next program. 100
will have a program cycle 100 times and then move on to the
next program. Press the SET UP button again once you have
found your desired cycle rate.
Example: "If N.002 is set, program 2 will cycle twice and
then switch to program 3. Program 3 will cycle twice and
then switch to program 4, and so on. It will continue to run
like this until you switch operating mode, or change your
cycle rate.
4. "Auto" will once again be displayed, and the fixture will start
cycling through the different programs at your selected speed
and flash rate.
Auto Mode via on IR Remote -
1. Press the AUTO RUN button, "AUTO" will be displayed.
2. Press the AUTO RUN button, "S.XXX" will now be displayed.
XXX represents the current speed level displayed. You can now
set the speed of the Auto Mode. The speed is adjustable from
American DJ - www.americandj.com - LED Messenger Instruction Manual Page 13
®

Auto Mode

LED Messenger
"S001"-"S100". 100 being the fastest speed. Press the AUTO
RUN button again once you have found your desired speed.
3. "N.XXX" will now be displayed. You can now set the amount
of times each program will cycle through Auto Mode. The cycle
rate is adjustable from "N.001"-"N.100". 001 will have a pro-
gram cycle once and then move on to the next program. 100
will have a program cycle 100 times and then move on to the
next program. Press the AUTO RUN button again once you
have found your desired cycle rate.
See the Example under Auto Mode via On Board Control.
4. "Auto" will once again be displayed, and the fixture will start
cycling through the different programs at your selected speed
and flash rate.
LED Messenger
In Sound Active mode the LED Messenger will react to sound
and randomly change through the different programs.
Sound Active Mode via on board control -
1. Press the MODE button, until "SU.XX" is displayed. XX repre-
sents the sound sensitivity level.
2. Press either the UP or DOWN buttons to adjust the sound
sensitivity leve from "SU.00"-"SU.31". 00 being the least sensi-
tive and 31 being the most sensitive.
Sound Active Mode via on IR Remote -
1. Press the SOUND ACTIVE button, and "SU.XX" is displayed.
XX represents the sound sensitivity level.
2. Press either the UP or DOWN buttons to adjust the sound
sensitivity leve from "SU.00"-"SU.31". 00 being the least sensi-
tive and 31 being the most sensitive.
American DJ - www.americandj.com - LED Messenger Instruction Manual Page 14
®
Auto Mode

Sound Active Mode