Lubricant Specifications - Ford 2002 Mustang Owner's Manual

Maintenance and Specifications
meeting Ford specification EST-M2C118–A for
complete refill of Traction-Lok axles.
3
Ensure the correct automatic transmission fluid is
used. Transmission fluid requirements are indicated
on the dipstick or on the dipstick handle. MERCON
and MERCON V are not interchangeable. DO NOT
mix MERCON and MERCON V. Refer to your
scheduled maintenance guide to determine the
correct service interval.
4
Indicates only approximate dry-fill capacity. Some
applications may vary based on cooler size and if
equipped with an in-tank cooler. The amount of
transmission fluid and fluid level should be set by
the indication on the dipstick's normal operating
range.
5
Service refill capacity is determined by filling the
transmission to the bottom of the filler hole with the
vehicle on a level surface.

LUBRICANT SPECIFICATIONS

Item Ford part
name
Brake fluid Motorcraft
High
Performance
DOT 3 Motor
Vehicle Brake
Fluid
Door Silicone
weatherstrips Lubricant
Door latch, Multi-Purpose
hood latch, Grease
auxiliary hood
latch, door
hinges, striker
plates, seat
tracks and fuel
filler door
hinge
240
Ford part Ford
number specification
PM-1 ESA-M6C25-A
and DOT 3
F7AZ-19G208-BA ESR-M13P4-A
and
F5AZ-19553-AA
XG-4or ESR-M1C159-A
F5AZ-19G209-AA