Replacing Headlamp Bulbs (Aerodynamic); Replacing Headlamp Bulbs (Sealed Beam) - Ford 2002 F-250 Owner's Manual

Lights
Function
Rear fender clearance
Interior visor lamp (if equipped)
Rear identification
All replacement bulbs are clear in color except where noted.
To replace all instrument panel lights - see your dealer
(a)
Replace entire lamp assembly; bulb is not serviceable.

Replacing headlamp bulbs (aerodynamic)

1. Make sure that the headlamp control is in the OFF position open the
hood.
2. Disconnect the electrical connector from the bulb by pulling rearward.
3. Remove bulb retainer ring by
turning it counterclockwise, then
slide the ring off the plastic base
4. Pull bulb out of headlamp
assembly.
Handle a halogen headlamp bulb carefully and keep out of
children's reach. Grasp the bulb only by its plastic base and do
not touch the glass. The oil from your hand could cause the bulb to
break the next time the headlamps are operated.
Install the new bulb(s) in reverse order.

Replacing headlamp bulbs (sealed beam)

1. Make sure headlamp switch is in OFF position and open the hood.
40
Number of Trade number
bulbs
4
4
3
(a)
194
194