Lubricant Specifications - Ford 2002 F-250 Owner's Manual

3
Add the coolant type originally equipped in your vehicle.
4
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. Check the container to verify the fluid being added is of the
correct type. Refer to your scheduled maintenance guide to determine
the correct service interval.
Some transmission fluids may be labeled as dual usage, such as
MERCON and MERCON V. These dual usage fluids are not to be used
in an automatic transmission that requires use of the MERCON type
fluid. However, these dual usage fluids may be used in transmissions that
require the MERCON V type fluid.
MERCON and MERCON V type fluids are not interchangeable.
DO NOT mix MERCON and MERCON V. Use of a transmission
fluid that indicates dual usage (MERCON and MERCON V) in
an automatic transmission application requiring MERCON may
cause transmission damage. Use of any fluid other than the
recommended fluid may cause transmission damage.
5
Service refill capacity is determined by filling the transmission to the
bottom of the filler hole with the vehicle on a level surface. The 6–speed
manual transmission is equipped with an in-tank cooler. Verify the fluid
level after operating vehicle to assure correct fluid level.
6
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick's normal operating range.

LUBRICANT SPECIFICATIONS

Ford part
Item name or
equivalent
High
Temperature
Spindle bearing 4X4 Front Axle
and Wheel
Bearing Grease
Front axle Hypoid Gear Oil
(4X4) SAE 90
Maintenance and Specifications
Ford part
number
E8TZ-19590–A
C6AZ-19580–E
Ford
specification
ESA-M1C198–A
ESW-M2C105–A
237