Checking The Divx ® Registration; Initializing The System; Bluetooth Setting; Setting The Bluetooth On/Off - Alpine ICS-X7HD Owner's Manual

®
Checking the DivX
This unit will display the registration code required to play a DivX
VOD (Video On Demand), or you can also display the deregistration
code.
Setting item: Warranty / Copyright Info.
Displaying the Registration Code
1
Touch [Warranty/Copyright Info.].
2
Touch [DivX(R) VOD].
3
Touch [Registration].
The registration code is displayed on the screen.
4
Touch [OK].
Displaying the Deregistration Code
1
Touch [Warranty/Copyright Info.].
2
Touch [DivX(R) VOD].
3
Touch [Deregistration].
The confirmation dialog screen appears.
4
Touch [OK].
The deregistration code is displayed on the screen.
• When you have finished, touch [Cancel]. If you want to continue and
display a new registration code, touch [OK], check the registration
code, and then touch [OK] again.

Initializing the System

You can initialize all data, to restore the factory settings. Remove the
USB memory, etc. from the system before operation
Setting item: Clear All Settings
1
Touch [Reset] of "Clear All Settings."
2
After the confirmation message appears, touch
[OK].
The system starts initialization.
• Do not turn on/off the power or change the ignition key position until
system restart is completed.

BLUETOOTH Setting

[BLUETOOTH] is selected on the General setup menu in step 3. Refer
to "General Setup Operation" (page 27).

Setting the BLUETOOTH On/Off

When using BLUETOOTH, first set the BLUETOOTH mode to "On."
Touch [On] or [Off] of "BLUETOOTH" in the General
Setup screen.
After selecting "On," you can adjust BLUETOOTH settings by
touching [BLUETOOTH].
• If the Bluetooth setting is "Off," you cannot move to the
BLUETOOTH setting screen.
Registration
®

Setting the BLUETOOTH Device

Registering the BLUETOOTH Device
The BLUETOOTH device is used when a connectable BLUETOOTH
compatible device is searched and connected from this unit, or a new
BLUETOOTH compatible device is registered.
1
Touch [Set BLUETOOTH Device].
2
Touch [Search] of "No Device."
The Device list displays up to 10 items.
3
Touch [Audio], [HFT] or [Both] of the device you
want to connect from the list.
Audio: Sets for use as an Audio device
HFT: Sets for use as a Hands Free Device.
Both: Sets for use as both an Audio device and Hands Free
Device.
• You can connect (pair) up to 5 BLUETOOTH compatible
mobile phones.
4
When the device registration is complete, a message
appears and the device returns to normal mode.
• The BLUETOOTH registration process differs depending on the
device version and SSP (Simple Secure Pairing). If a 4 or 6 character
Passcode appears on this device, enter the Passcode using the
BLUETOOTH compatible device.
If a 6 character Passkey appears on this device, make sure the same
passkey is displayed on the BLUETOOTH compatible device and
touch "Yes."
• If all the 5 devices have been registered, you cannot register the 6th
device. To register another device, you need to delete one of the
devices from position 1 to 5 first.
Setting the BLUETOOTH Device
Select one of 5 paired BLUETOOTH compatible devices that you
previously registered.
1
Touch [Set BLUETOOTH Device].
2
Touch [Audio] or [HFT] of the device you want to
connect from the Paired Device list.
Deleting a BLUETOOTH Device from the list
You can delete the information of a previously connected
BLUETOOTH compatible device.
1
Touch [Set BLUETOOTH Device].
2
Touch [Delete] of the BLUETOOTH compatible
device to delete from the Paired Device list.
A message is displayed.
3
Touch [OK].
• Touching [Cancel] will cancel the setting.

Automatic Connection Setting

If the Automatic Connecting setting is "On," automatic connection is
performed for the BLUETOOTH audio device registered in the Paired
Device list.
Setting item: Auto Connect
Setting contents: Off / On (Initial setting)
29
-EN