Advertisement
6. Mount the repeater in the bracket using the corner screws, but
without the rubber feet.
7. Mount the bracket to the wall using the #8 x 7/8" pan head Phillips
screws (D).
8. Set aside the rubber feet. They are no longer required.
For specific dimensions, please see Figure 2.
0.37
(0.94)
0.14
(0.36)
These dimensions are subject to change without further notice from ATI.
6.14
(15.60)
4.63
(11.76)
3.67
(9.32)
4.63
(11.76)
Figure 2: Dimensions
0.20
(0.51)
10.40
(26.42)
8.15
(20.70)
1.70
(4.32)
3
Advertisement
