Allied Telesis AT-BRKT15 Installation Manual page 2

Installing your Allied Telesyn AT-BRKT15
Refer to Figure 1.
1. Using the bracket as a template, mark the screw holes.
2. Use an awl or other punch to punch pilot holes.
3. Drill the holes.
4. If mounting on wallboard, insert the Bantam plugs into the holes.
Gently encourage the plugs with a hammer if necessary.
5. Remove the repeater's bottom corner screws (B) and rubber feet.
2
A
Figure 1: Vertical Installation Example
D
D
B
B
C