Alcatel-Lucent SFP Manual page 45

10-Gigabit Small Form Factor Pluggables (XFPs)
10-Gigabit Ethernet Transceivers (cont.)
XFP-10G-CX4
10-Gigabit XFP Copper Transceiver.
Connector Type
Standards Supported
Connections supported
Cable Type
Transmission Distance
Digital Diagnostic Monitoring
Notes
XFP-10G-DWDM
Dense Wavelength Division Multiplexing (DWDM), 100GHz ITU Grid, C-Band optical transceiver supporting
single-mode fiber over various wavelengths. DWDMs are hot-pluggable and are available for long-reach appli-
cations.
Connector type
Standards Supported
Fiber Type
Wavelength
Optical Power Output
Receiver Sensitivity
Transmission Distance
Power consumption
Operating Temperature
Digital Diagnostic Monitoring
Notes
OmniSwitch Transceivers Guide
CX4
802.3ak, XFP MSA
10GBase-CX4
Standard CX4 copper cables compliant with IEEE 802.3ak
∼
15 m
Not Supported
InfiniBand type cables not supported.
LC
XFP MSA
SMF
Channel 35 - 1549.32
Channel 37 - 1547.72
Channel 38 - 1546.92
Channel 39 - 1546.12
Channel 59 - 1530.33
-3 to +3 dBm
-23 or -27 dBm
∼
80 km
<3.5W
-5 ºC to 70 ºC
Not Supported
The transmitter becomes operational within 60 seconds of power-up.
This is due to the time required for the transceiver to reach its optimum
operating temperature.
April 2011
10-Gigabit Ethernet Transceivers
page 3-33