Onkyo CR-245DAB Instruction Manual page 27

Listening to the Radio
3. Bit Rate and Audio Mode
Displays the station's bit rate and audio mode
(stereo, mono, or joint stereo).
64k„ „ b p„ „ s „ „ M „ „ o n„ „ o
4. Signal Quality
Displays the signal quality.
0–59: Poor reception
60–79: Good reception
80–100: Excellent reception
Qua„ „ l i„ „ t y„ „ : „ „ 8„ „ 6
5. Multiplex Name
Displays the name of the current multiplex.
„ „ D A„ „ B
6. Multiplex Number and Frequency
Displays the number and frequency of the current
multiplex.
12B„ „ 2„ „ 2 5„ „ . „ „ 6 M„ „ H z
DAB Setup
F/H
ENTER
MODE
Use the following functions and settings to set up DAB
digital radio.
1 Press the [MENU] button.
2 Use the Up/Down []/[] buttons to select
the item you want to set, and then press the
[ENTER] button.
The items are explained below.
—Continued
■ Scan?
This setting determines which DAB bands are scanned
by the Auto Tuning function (see page 26).
World (default): Band III (5A–13F).
UK: Band III (10A–13F).
■ DRC?
With the DRC (Dynamic Range Control) setting, you
can reduce the dynamic range of DAB digital radio so
that you can still hear quiet parts even when listening at
low volume levels—ideal for listening to the radio late at
night when you don't want to disturb anyone.
Use the Up/Down []/[] buttons to select the following
options, and then press the [ENTER] button.
0 (default): DRC off.
1: Large reduction in dynamic range.
1/2: Small reduction in dynamic range.
DAB Tuning Mode
ENTER
MODE
1 Press the [MODE] button.
2 The items toggle in the order of
"Alphabet"➜"Multiplex"➜"Active ST" each
time the [MODE] button is pressed.
3 Press the [ENTER] button.
"Complete" appears.
With this setting, you can sort the available stations
alphabetically, by multiplex, or active stations.
Alphabet (default): Sort stations alphabetically.
Multiplex: Sort stations by multiplex.
Active ST: Sort by active stations.
Receivable stations appear at the
top of the list. stations that cannot
be received properly appear at the
bottom of the list.
27
En-