Connecting Antennas; Connecting Other Components - Onkyo CR-245DAB Instruction Manual

Cd receiver system
Table of Contents

Advertisement

Connecting Antennas

Connecting FM Antenna
This section explains how to connect the supplied indoor
FM antenna.
The CD receiver won't pick up any radio signals if no
antenna is connected, so you must connect the antenna to
use the tuner.
Insert the plug
fully into the jack.
Note:
• Once your CD receiver is ready for use, you'll need to
tune into a radio station and position the antenna to
achieve the best possible reception.
Tip:
• If you cannot achieve good reception with the
supplied indoor FM antenna, try a commercially
available outdoor FM antenna instead.

Connecting Other Components

Analog audio
cable (RCA)
e.g., casette tape deck
Connecting the DAB Antenna
If using a DAB antenna, connect it to the same antenna
jack as the FM antenna.
If an FM antenna is already connected, you'll need to
disconnect it.
Since a DAB antenna is not supplied with this unit, you'll
need to purchase a commercially available DAB
antenna.
Note:
• When purchasing a DAB antenna, choose one that fits
CD receiver
Powered
subwoofer
the DAB/FM antenna jack located on the rear panel of
the CD receiver.
TV, projector, etc.
(Connector type varies
from country to country.)
VIDEO
IN
To wall outlet
15
En-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs-245dabD-t05

Table of Contents