Table of Contents
Advertisement
■
Analog / PCM
With this setting, you can specify the listening mode to
be used when an analog (CD, TV, LD, VHS, MD, turn-
table, radio, cassette, cable, satellite, etc.) or PCM digi-
tal (CD, DVD, etc.) audio signal is played.
■
Mono/Multiplex Source
With this setting, you can specify the listening mode to
be used when a mono digital audio signal is played
(DVD, etc.).
■
2ch Source
With this setting, you can specify the default listening
mode for 2-channel (2/0) stereo sources in a digital for-
mat, such as Dolby Digital or DTS.
■
Dolby D/Dolby D +/TrueHD
With this setting, you can specify the listening mode to
be used when a Dolby Digital or Dolby Digital Plus for-
mat digital audio signal is played (DVD, etc.). Specifies
the default listening mode for Dolby TrueHD sources,
such as Blu-ray or HD DVD (input via HDMI).
■
DTS/DTS-ES/DTS-HD
With this setting, you can specify the listening mode to
be used when a DTS or DTS-HD High Resolution for-
mat digital audio signal is played (DVD, LD, CD, etc.).
Specifies the default listening mode for DTS-HD Mas-
ter Audio sources, such as Blu-ray or HD DVD (input
via HDMI).
■
Other Multich Source
With this setting, you can specify the default listening
mode for multichannel PCM sources from HDMI IN
such as DVD-Audio, and DSD multichannel sources
such as Super Audio CD.
En
44
Miscellaneous
Main menu
Miscellaneous
Volume Setup
■
Maximum Volume
Off, 30 to 79
With this setting, you can limit the maximum vol-
ume.
To disable this setting, select "Off".
■
Power On Volume
Last, Min, 1 to 79 or Max
With this preference, you can specify the volume set-
ting to be used each time the AV receiver is turned
on.
To use the same volume level that was used when the
AV receiver was turned off, select "Last".
The "Power On Volume" cannot be set higher than
the "Maximum Volume" setting.
■
Headphone Level
–12dB to 0dB to +12dB
With this preference, you can specify the headphone
volume relative to the main volume. This is useful if
there's a volume difference between your speakers
and your headphones.
OSD Setup
■
On Screen Display
This preference determines whether operation details
are displayed on-screen when an AV receiver function is
adjusted.
On:
Displayed.
Off:
Not displayed.
Even when "On" is selected, operation details may not be
output if the input source is connected to an HDMI IN.
■
TV Format (European, Australian and Asian
models)
For the on-screen setup menus to display properly, you
must specify the TV system used in your area.
Auto:
Select this to automatically detect the TV system
from the video input signals.
NTSC:
Select this if the TV system in your area is NTSC.
PAL:
Select this if the TV system in your area is PAL.
■
Language
English, Deutsch, Français, Español, Italiano, Ned-
erlands, Svenska,
This setting determines the language used for the on-
screen setup menus.
Hide quick links:
Advertisement
Table of Contents
