Advanced Setup; On-Screen Setup Menus; Common Procedures In Setup Menu - Onkyo TX-SR578 Instruction Manual

Advanced Setup

On-screen Setup Menus

The on-screen setup menus appear only on a TV that
is connected to the HDMI OUT. If your TV is con-
nected to the composite video MONITOR OUT or the
COMPONENT VIDEO OUT, use the AV receiver's
display when changing settings.
This manual describes the procedure using the
remote controller unless otherwise specified.
MENU
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
Input/Output Assign
35)
(➔
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
Speaker Setup
2. Speaker Setup
1. Speaker Settings
2. Speaker Configuration
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
Audio Adjust (➔
3. Audio Adjust
1. Multiplex/Mono
2. Dolby
3. DTS
4. Theater-Dimensional
Source Setup (➔
4. Source Setup
1. Audyssey
2. IntelliVolume
3. A/V Sync
4. Name Edit
5. Picture Adjust
Listening Mode Preset
(➔ 43)
5. Listening Mode Preset
1. BD/DVD
2. VCR/DVR
3. CBL/SAT
4. GAME
5. AUX
6. TUNER
En
7. TV/CD
8. PORT
34
Miscellaneous
6. Miscellaneous
1. Volume Setup
2. OSD Setup
(➔ 36) Hardware Setup
45)
(➔
7. Hardware Setup
1. Remote ID
2. Tuner
3. HDMI
38) Remote Controller
Setup (➔ 56)
8. Remote Controller Setup
1. Remote Mode Setup
40) Lock Setup (➔
9. Lock Setup
Lock

Common Procedures in Setup Menu

ENTER
/ / /
SETUP
The on-screen setup menus appear on the connected TV
and provide a convenient way to change the AV receiver's
various settings. Settings are organized into nine catego-
ries on the main menu.
Carry out the settings by using the on-screen display.
1
Press RECEIVER followed by SETUP.
The following menu appears.
(➔ 44)
Tip
• If the main menu doesn't appear, make sure the appropri-
ate external input is selected on your TV.
2
Use / to select a menu, and then press ENTER.
3
Use / to select target, and then press ENTER.
4
Use / to select option and
setting.
Press SETUP to close the menu.
Press RETURN to return to the main menu.
46)
Note
• This procedure can also be performed on the AV receiver by
using SETUP, arrow buttons, and ENTER.
• During Audyssey 2EQ
messages, etc., that are displayed on the TV screen will appear
in the Display.
Remote indicator
RECEIVER
RETURN
MENU
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
/ to change the
® Room Correction and Speaker Setup,