Miscellaneous; Hardware Setup - Onkyo TX-NR636 Advanced Manual

6.Miscellaneous

Volume Setup
Make the detailed volume setting of the unit.
Setting item Default Value
Maximum Volume Off
Power On Volume Last
Headphone Level 0 dB
OSD Setup
Make the setting of on-screen display function that can display the setting menu screen,
volume operation screen and the like on the TV.
Setting item Default Value
On Screen Display On
Language English
Screen Saver 3min
Setting Details
Set the maximum value to avoid too high volume.
Select a value from "Off", "30" to "79".
Set the volume level of when the power is turned
on. Select a value from "Last" (Volume level
before entering standby mode), "Min", "1" to "79"
and "Max".
• You cannot set a higher value than that of
"Maximum Volume".
Adjust the volume level difference between
speakers and headphones. Select a value
between "-12 dB" to "+12 dB".
Setting Details
Set whether or not to display the operation
screen on the TV.
"On": The operation screen will be displayed on
the TV.
"Off": The operation screen will not be displayed
on the TV.
• The operation screen may not be displayed
depending on the input signal even if "On"
is selected. If the operation screen is not
displayed, change the resolution of the
connected device.
Select the on-screen display language.
Set the time to start the screen saver. Select a
value from "3min", "5min", "10min" and "Off".

7.Hardware Setup

Tuner
Setting item Default Value
AM/FM Frequency 10kHz/200kHz
Step (North
American and
Taiwanese models)
AM Frequency 9kHz
Step (European,
Australian and Asian
models)
Advanced Settings
Setting Details
Select a frequency step depending on your
area of residence.
Select "10kHz/200kHz" or "9kHz/50kHz".
• When this setting is changed, all radio
presets are deleted.
Select a frequency step depending on your
area of residence.
Select "10kHz" or "9kHz".
• When this setting is changed, all radio
presets are deleted.
33