Table of Contents
Advertisement
Muting the AV Receiver
You can temporarily mute the output of the AV receiver.
Press RECEIVER followed by MUTING.
The output is muted and the MUTING indicator
flashes on the display.
Tip
• To unmute, press MUTING again or adjust the volume.
• The Mute function is cancelled when the AV receiver is set to
Standby.
Using the Sleep Timer
With the sleep timer, you can set the AV receiver to turn
off automatically after a specified period.
Press RECEIVER followed by SLEEP repeatedly
to select the required sleep time.
The sleep time can be set from 90 to 10 minutes in
10 minute steps.
The SLEEP indicator lights on the display when the
sleep timer has been set. The specified sleep time
appears on the display for about five seconds, then
the previous display reappears.
Tip
• If you need to cancel the sleep timer, press SLEEP repeatedly
until the SLEEP indicator goes off.
• To check the time remaining until the AV receiver sleeps, press
SLEEP. Note that if you press SLEEP while the sleep time is
being displayed, you'll shorten the sleep time by 10 minutes.
Selecting Speaker Layout
You can prioritize which speakers you want to use.
Press RECEIVER followed by SP LAYOUT
repeatedly.
Speaker Layout:FH:
The sound from front high speakers is output
by priority.
Speaker Layout:SB:
The sound from surround back speakers is out-
put by priority.
Note
• If the "Speakers Type" setting is set to "Bi-Amp"
Powered Zone 2 is being used
selected.
• When the listening mode that doesn't support front high or sur-
round back speakers is used, the setting cannot be selected.
(➔
37), or
(➔
50), this setting cannot be
Using the Audio and Video Menus
By pressing AUDIO or VIDEO, you can have a quick
access to frequently used menus without having to go
through the long standard menu. The menus enable you to
change settings and view the current information.
1
Press RECEIVER followed by AUDIO or VIDEO.
Either of the following screens will be superimposed
on the TV screen.
BD/DVD
Audio
Bass
Video
Treble
Info
Subwoofer Level
Input Sel
Center Level
Listening Mode
Dynamic EQ
Dynamic Volume
BD/DVD
Audio
Wide Mode
Video
Picture Mode
Info
Input Sel
Listening Mode
2
Use / / /
to make the desired selection.
Audio
*1
You can change the following settings: "Bass",
"Treble", "Subwoofer Level", "Center
Level", "Dynamic EQ", "Dynamic Volume",
"Late Night", "Music Optimizer", "Cinema
filter", and "Audio Selector".
See also:
• "Audyssey"
(➔
• "Using the Audio Settings"
*2
Video
You can change the following settings: "Wide
Mode" and "Picture Mode".
See also:
• "Picture Adjust"
Info
*3*4
You can view the information of the following
items: "Audio", "Video", and "Tuner".
Input
*4*5
You can select the input source while viewing
the information as follows: the name of input
selectors, input assignments, and radio infor-
mation, and ARC function setting.
Press ENTER to display the current input
source, followed by / to select the desired
input source. Pressing ENTER again switches
to the selected input source.
Listening Mode
You can select the listening modes that are
grouped in the following categories: MOVIE/
TV, MUSIC and GAME.
Use / to select the category and
select the listening mode. Press ENTER to
switch to the selected listening mode.
0dB
•
Auto
40)
(➔
47)
42)
(➔
/
to
En
21
Hide quick links:
Advertisement
Table of Contents
