Chapter 1. Getting Started; Introduction - Albatron PX865PEC PRO User Manual

PX865PEC PRO

Chapter 1. Getting Started

Introduction

Congratulations on choosing the PX865PEC PRO mainboard! It is based on the 865PE Northbridge
® ®
chipset and the ICH5 Southbridge chipset. It supports Intel Pentium 4 (Northwood/ Prescott)
Processors with a FSB (Front Side Bus) frequency of 800/533/400 MHz.
The PX865PEC PRO mainboard provides 4 DIMM sockets using 184 pin DDR SDRAM with a total
capacity of up to 4GB. You can install unbuffered & non-ECC DDR400/ 333/ 266 (PC3200/ 2700/
2100) SDRAM.
The PX865PEC PRO mainboard provides one 8X/ 4X AGP Slot that uses 0.8V or 1.5V AGP cards.
The PX865PEC PRO mainboard includes built in IDE facilities that support Ultra ATA 33/66/100
BMIDE and PIO Modes. It also includes built in Serial ATA facility that support SATA 150.
The PX865PEC PRO mainboard comes with an AC'97 Sound Codec (ALC655) which supports high
quality 6 channels audio (Super 5.1 Channel Audio Effect). It also supports Sony/ Philips Digital
Interface (S/PDIF).
The PX865PEC PRO mainboard also comes with eight USB 2.0 ports.
Besides the PX865PEC PRO mainboard also comes with a LAN chip and provides a back panel
LAN port that supports 10/ 100 Mbps transmission speeds.
The PX865PEC PRO mainboard also comes with AGP protection which ensures that you only install
0.8V or 1.5V AGP cards.
All of the information in this manual only for reference. This specification is subject to change
without notice.
1