Ttl Auto - Olympus MACRO FLASH SYSTEM Instructions Manual

<TTL AUTO>
In this mode, pre-flash is performed to measure the optimum flash light intensity and then the
actual flash is emitted.
MACRO FLASH CONTROLLER
FC-1
LIGHT
RATIO GN/
MACRO FLASH CONTROLLER
FC-1
LIGHT
RATIO GN/
1.
See the following table and set the lens iris (F) according
to the lens in use.
MODE
LAMP
Standard lens iris
AUTO
CHECK
Zuiko Digital lenses
TEST/
CHARGE
ZUIKO DIGITAL ED50mm f2 Macro
POWER
ZUIKO DIGITAL 14-54mm f2.8-3.5
ZUIKO DIGITAL ED50-200mm f2.8-3.5
• Even if a different lens iris (F) Is used, optimum flash
exposure is also available provided that it falls within
the light control range of the flash in use.
• The flash's light control range varies according to the
lens and shooting distance. See page 24 for details.
2.
When flash activation has been performed correctly, the
MODE AUTO CHECK lamp blinks for about 5 seconds after
the shutter is released. If the lamp does not blink, the
LAMP
exposure may be incorrect. In this case, you will need
AUTO
CHECK
to adjust shooting settings such as the lens iris (F).
TEST/
CHARGE
POWER
F11
F8