Olympus Camedia AZ-2 ZOOM Advanced Manual page 159

LCD monitor
●
Do not push the monitor forcibly; otherwise the image may become fuzzy,
resulting in a playback mode failure or damage to the monitor. If the monitor is
damaged, be careful not to get any of the liquid crystals from the monitor in your
mouth. If liquid crystals get on your limbs or clothes, wash them off.
●
A strip of light may appear on the top/bottom of the monitor, but this is not a
malfunction.
●
When a subject is viewed diagonally in the camera, the edges may appear
zigzagged on the monitor. This is not a malfunction; It will be less noticeable in
playback mode.
●
In places subject to low temperatures, the LCD monitor may take a long time to
turn on or its color may change temporarily. When using the camera in extremely
cold places, it is a good idea to occasionally place it in a warm place. A LCD
monitor exhibiting poor performance due to low temperatures will recover in
normal temperatures.
●
The LCD monitor is made with high-precision technology. However, black
spots or bright spots of light may appear on the LCD monitor. These spots
may not be uniform in color and brightness depending on their
characteristics or the angle at which you are viewing the monitor. This is
not a malfunction.
Safety precautions
159
9